| Author |
 Topic  |
|
Zyzx`1
Junior Member
|
 Posted - September 07 2001 : 06:31:34 AM
My friend just bought a new Athlon 1.4ghz along with an ABit mobo w/ VIA Apollo266A + RAID controller. I know the new Athlons need at least a 300v power supply but should I get a 300v, 350v, or a 400v?
Any help would be great |
X-FACTOR
Senior Member
|
Posted - September 07 2001 : 06:46:54 AM
Get a 400w, that way you could run plenty of fans as well.  |
HardDrive
Advanced Member
|
Posted - September 07 2001 : 1:26:04 PM
Yea get a 400 I have a similar set up in my system and if I run My Neons off of the PC power supply, the damn system wont boot up or even post..LoL
|
Herrenvolk
|
Posted - September 07 2001 : 8:50:20 PM
No one should theoretically need more than 300W. If you don't intend on installing some serious cooling solution or ridiculous 'neon' lights, etc; then 300W should be more than enough. The power supply and processor (retail) will come with a fan, and the video card if it is fairly current. |
Zyzx`1
Junior Member
|
Posted - September 07 2001 : 9:33:09 PM
I found out today that GeForce2 cards will need extra power, therefore, I'm probably going to stick with a 400watts power.
My friend and I are looking at Antec's workstation 840 model which has 400watts with a nice 4 fans slot  . The only problem is it is a bit too expensive and the shipping and handling will cost $30+. I'll be making a 1 hour drive to a Fry's warehouse in Garland this week and hopefully can find it there. |
Herrenvolk
|
Posted - September 08 2001 : 7:45:21 PM
OMG...no, don't waste the money.
Get informed first. Belive me, I work with this stuff.Look for a motherboard with an "AGP PRO" slot then. It is a higher voltage AGP 4x slot for higher-end video cards, but the video cards we're talking about that actually use this are FireGL cards, etc... |
Hardware question
